[Help] Guide install ubuntu for RK3399

Chip Platform Rockchip
,
1

Hi all,
I’m installing Ubuntu on RK3399 board. I’m not clear about steps for install it.
So, can you guide me step by step to install ubuntu on RK3399 board.
Many thank!

2

First , download the ubuntu firmware from firefly website
http://en.t-firefly.com/doc/download/3.html
and follow this for upgrade it
http://en.t-firefly.com/doc/product/info/id/263.html

3

leung先森 Posted at 8/13/2018 11:50
First , download the ubuntu firmware from firefly website
http://en.t-firefly.com/doc/download/3.ht …

Dear leung,

Just bought your board and tring to compile ubuntu and kernel , install them on board. From your web side “http://en.t-firefly.com/index.php/doc/product/info/id/290.html” and for kernel side says "After the compilation is complete , the kernel.img and resource.img should be generated in the kernel folder.

If you need to compile a xxx.dts in the arch/arm64/boot/dts/rockchip/ directory, then

make xxx.img -j4".Which dts file must be used for this rk3399 board?

Where can i find any video or pdf document that explains all steps.Could you pls help me about these subjects.

Best regards,

4

metind Posted at 12/1/2018 07:16
Dear leung,

Just bought your board and tring to compile ubuntu and kernel , install them on boa …

if rk3399-firefly-linux.dts exist , just use it . if not , use rk3399-firefly.dts
Build Android http://en.t-firefly.com/doc/product/info/id/275.html
All Document you can see herehttp://en.t-firefly.com/doc/product/index/id/3.html

5

How do I make an ubuntu sd card for firefly rk3399?

6

Make a sd card

Try the above link

7

nice