网口eth0不能正常使用,内核打印这个可能是什么原因呢?

固件类型:官方提供的固件
固件文件名称:rk3399_linux_release_v2.5.1_20210301_split_dir
固件下载地址:百度网盘 请输入提取码
Log日志:log.rar

[ 1.583126] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[ 1.583755] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[ 1.584270] rk_gmac-dwmac fe300000.ethernet: RX delay(0x11).
[ 1.584789] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[ 1.585509] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[ 1.586137] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[ 1.591681] rk_gmac-dwmac fe300000.ethernet: init for RGMII

网口eth0不能正常使用,内核打印这个可能是什么原因呢?

tchip_askquestions
log.rar (282 Bytes)

你是不是自己做的底板,用哪个核心板做的。应该是你phy芯片没有适配好

使用自己编译的固件还是官方固件?如果是官方固件提供一下固件全称。

给网卡提供工作环境的外围器件损坏导致,
更换了开发板 后,问题解决.