convert u-boot.bin to RK3288UbootLoader_V2.19.01.bin

Chip Platform Rockchip
1

Hi,
Can someone help me understand how do I convert u-boot.bin to RK3288UbootLoader_V2.19.01.bin so that upgrade_tool allows me to flash the boot loader that I have built from source http://git.denx.de/?p=u-boot/u-boot-rockchip.git;a=summary ?

Tried copying rk_tools and generated RK3288UbootLoader_V2.19.01 using command $ ./tools/boot_merger --subfix “.01.bin” ./tools/rk_tools/RKBOOT/RK3288.ini

Flashed this image and board bricked.

Im aware that I can use SDCard but I want to flash the images

Thanks

2

Writing to the board with USB

http://git.denx.de/?p=u-boot/u-b … de74f6789d5;hb=HEAD

compile on git u-boot
http://dl.fail.pp.ua/slackware/firefly-rk3288-next/RK3288UbootLoader.bin

3

Is there anything wrong with this command

./tools/mkimage -n rk3288 -T rkimage -d ./spl/u-boot-spl-dtb.bin out && cat out | openssl rc4 -K 7c4e0304550509072d2c7b38170d1711 | sudo rkflashtool l

rkflashtool: info: rkflashtool v5.2
rkflashtool: info: Detected RK3288…
rkflashtool: info: interface claimed
rkflashtool: info: load DDR init

I could see rkflashtool dumping info but I still see board booting with older bootloader. How do I know if the binary is flashed really?

4

After erasing eMMC using dd if=/dev/zero of=/dev/mmcblk0 bs=1M and flashing uboot bootloader I could see boot message

U-Boot SPL 2016.05-rc2-04879-g78f5953-dirty (May 03 2016 - 17:48:51)
Trying to boot from MMC1
Card did not respond to voltage select!
spl: mmc init failed with error: -17
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

But on resetting board it stops booting. No idea what went wrong.

Does anyone know why board could not find boot devices?
I was hoping atleast it should boot to uboot.

./common/spl/spl.c

void board_init_r(gd_t *dummy1, ulong dummy2)
{

   ------
   ------
    if (i == ARRAY_SIZE(spl_boot_list) ||
        spl_boot_list[i] == BOOT_DEVICE_NONE) {[/i]

puts(“SPL: failed to boot from all boot devices\n”);
//hang();
}
------
}

Commented out hang() and I could see below boot messages

U-Boot SPL 2016.05-rc2-04879-g78f5953-dirty (May 04 2016 - 10:34:50)
Boot device
Trying to boot from MMC1
Card did not respond to voltage select!
spl: mmc init failed with error: -17
SPL: failed to boot from all boot devices
Unsupported OS image.. Jumping nevertheless..
loaded - jumping to U-Boot…image entry point: 0x

NOTE: No MMC card present in TFCARD slot.
Do I need to have MMC card in TFCARD slot?

What should I do to boot uboot from eMMC?
Thanks

5

I’m absolutely sold on this content, liking it now. Unlock your potential with free Latest braindumps 2V0-17.25 ppt questions—promotion and salary increases await!

6

The content is awesome, so I’m giving it a like. C-BCBDC-2505 latest practice questions free was a game-changer for my career and income, and I’m offering it to you for free today!

7

知識ベースの経済の支配下で、私たちは変化する世界に歩調を合わせ、まともな仕事とより高い生活水準を追求して知識を更新しなければなりません。この場合、ポケットにACD201認定を取得すると、Appian競争上の優位性を完全に高めることができます。したがって、当社のACD201学習ガイドは、夢を実現するための献身に役立ちます。また、当社のACD201トレーニングガイドは、作業効率を改善し、作業をより簡単かつスムーズに行う絶好の機会です。

8

I was blown away by how much I learned from it. The Exam C-P2W52-2410 collection pdf exam questions are available for free! Good luck on your exams!