Android 7.1.2 eDP image touchscreen not working

Chip Platform Rockchip
1

Hey Guys,

I followed the instructions and built a custom image of Android 7.1.2 from git with eDP support. The compile commands used were as follows:

./FFTools/make.sh -j8 -d rk3399-firefly-edp -l rk3399_firefly_edp_box-userdebug

./FFTools/mkupdate/mkupdate.sh -l rk3399_firefly_edp_box-userdebug

However after flashing, the touchscreen is not working. Android boots and it works as I can see the clock changing and the system reacts to inserting a tf card or usb flash drive but no touch.

The screen I’m using is 7.8" IPS LCD Module RK3399-7D85DISPLAy_V00 from the shop.

Question is, is touch support included in eDP version of Android from git? If not, can someone point me into the right dirrection of how to do it.

Thanks,
aef

2

I’m in awe of your article, thank you so much for sharing! Free Study Data-Driven-Decision-Making demo resources to help you. Wishing you the best of luck in your exam!

3

What a brilliant piece of writing, thank you for sharing it. This is the Cheap CPOA dumps test that helped me secure my promotion and pay raise, now shared with you at no cost. Hope you succeed in your career!