Dual LVDS RK3288 AIO

Hello! Has anyone tried to get work a dual channel LVDS display on the aio-rk3288j with firefly sdk? I tried to connect single channel display and it’s work perfect, but when I connected dual channel display I have no picture. Display timings is right, on mainline kernel I have normal picture but not on firefly kernel.

dts:

&lvds_panel {
status = “okay”;
compatible =“simple-panel”;
power-supply = <&vcc_lcd>;
backlight = <&backlight>;
enable-delay-ms = <10>;
rockchip,data-mapping = “vesa”;
rockchip,data-width = <24>;
rockchip,output = “duallvds”;
rockchip,panel = <&lvds_panel>;

    display-timings {
            native-mode = <&timing0>;
            timing0: timing0 {
                    clock-frequency = <122000000>;

                    hactive = <1920>;
                    vactive = <720>;

                    hback-porch = <0>;
                    hfront-porch = <0>;

                    vback-porch = <0>;
                    vfront-porch = <0>;

                    hsync-len = <480>;
                    vsync-len = <120>;

                    hsync-active = <0>;
                    vsync-active = <0>;
                    de-active = <0>;
                    pixelclk-active = <0>;
            };
    };

};

Hi WeX,

Have you fixed the problem?
I met similar issue.

Thanks.

I am also facing the same problem, hope to find the answer in your post. Thank! cookie clicker

RK3288 only supports dual dsi, there is no official case of dual lvds or dsi.

If you want to use dual lvds, one of the lvds needs to be converted output, for example, convert dsi to lvds.

Truly outstanding, thank you for sharing this brilliant article. The New free FCP_FMG_AD-7.6 study guide test questions are free for all—your key to a successful career!

Thank you for sharing such a motivational and uplifting article! The content in FCP_FMG_AD-7.6 reliable exam practice is rich and free of charge, created with your success in mind.