小白一个,请教如何基于rk3288平台 添加mipi接口4lane lcd驱动

如题,公司需要添加个lcd屏幕驱动,打算让我点亮,我现在有点不知道怎么入手。
供应商只给了简单的初始化代码。规格书 时序都没有。请问,我该如何入手。麻烦请教
TFT7201280-48-E(4.99D)v1.0.pdf (795 KB)

#if  1

		   /**********initial code**********/
		// Set EXTC
		{0x39, 0, 0, 0, 0, 4,{0xB9,0xFF,0x83,0x94}},

		// Set Power  VSPR=VSNR=5.0  VGH=16V,VGL=-10V
		{0x39, 0, 0, 0, 0, 11,{0xB1,0x48,0x14,0x74,0x09,0x33,0x54,0x71,0x31,0x57,0x2F}},

		// Set MIPI
		{0x39, 0, 0, 0, 0, 7,{0xBA,0x63,0x03,0x68,0x6B,0xB2,0xC0}},

		// Set Display
		{0x39, 0, 0, 0, 0, 7,{0xB2,0x00,0x80,0x64,0x06,0x0E,0x2F}},

		// Set CYC
		{0x39, 0, 0, 0, 0, 22,{0xB4,0x01,0x78,0x01,0x78,0x01,0x78,0x01,0x0C,0x86,0x35,0x00,0x3F,0x1C,0x78,0x1C,0x78,0x1C,0x78,0x01,0x0C,0x86}},

		//Modified By GRG For Line Imagesticking
		{0x39, 0, 0, 0, 0, 22,{0xB4,0x01,0x70,0x01,0x70,0x01,0x70,0x01,0x05,0x86,0x35,0x00,0x3F,0x1C,0x70,0x01,0x70,0x01,0x70,0x01,0x05,0x86}},

		// Set D3H
		{0x39, 0, 0, 0, 0, 34,{0xD3,0x00,0x00,0x00,0x00,0x08,0x08,0x10,0x10,0x32,0x10,0x03,0x00,0x03,0x32,0x15,0x07,0x05,0x07,0x32,0x10,0x08,0x00,0x00,0x17,0x01,0x07,0x07,0x17,0x05,0x05,0x17,0x06,0x40}},

		// Set GIP
		{0x39, 0, 0, 0, 0, 45,{0xD5,0x18,0x18,0x18,0x18,0x26,0x27,0x24,0x25,0x06,0x07,0x04,0x05,0x02,0x03,0x00,0x01,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x20,0x21,0x22,0x23,0x18,0x18,0x18,0x18}},

		// Set GIP
		{0x39, 0, 0, 0, 0, 45,{0xD6,0x18,0x18,0x18,0x18,0x21,0x20,0x23,0x22,0x01,0x00,0x03,0x02,0x05,0x04,0x07,0x06,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x27,0x26,0x25,0x24,0x18,0x18,0x18,0x18}},

		// Set Gamma
		{0x39, 0, 0, 0, 0, 59,{0xE0,0x00,0x05,0x0B,0x11,0x12,0x16,0x19,0x17,0x30,0x40,0x50,0x4F,0x58,0x69,0x6F,0x71,0x7F,0x82,0x7E,0x8D,0x9E,0x4F,0x4F,0x53,0x58,0x5D,0x67,0x74,0x7F,0x00,0x05,0x0B,0x11,0x12,0x16,0x19,0x17,0x30,0x40,0x50,0x4F,0x58,0x69,0x6F,0x71,0x7F,0x82,0x7E,0x8D,0x9E,0x4F,0x4F,0x53,0x58,0x5D,0x67,0x74,0x7F}},

		// Set Panel
		{0x15, 0, 0, 0, 0, 2,{0xCC,0x0b}},

		// Set C0H
		{0x39, 0, 0, 0, 0, 3,{0xC0,0x1F,0x73}},

		// Set VCOM
		{0x39, 0, 0, 0, 0, 3,{0xB6,0x43,0x43}},

		// Set D4h
		{0x15, 0, 0, 0, 0, 2,{0xD4,0x02}},

		// Set BDH
		{0x15, 0, 0, 0, 0, 2,{0xBD,0x01}},

		{0x15, 0, 0, 0, 0, 2,{0x36,0x00}},

		// Set GAS
		{0x15, 0, 0, 0, 0, 2,{0xB1,0x00}},

		// Set BD
		{0x15, 0, 0, 0, 0, 2,{0xBD,0x00}},

		{0x15, 0, 0, 0, 0, 2,{0xC6,0xEF}},

		// Sleep Out
		{0x05, 0, 0, 0, 150, 1,{0x11}},

		// Display ON
		{0x05, 0, 0, 0, 50, 1,{0x29}},

#endif

///////////////////////////////////////////////

#define LCD_WIDTH           24
#define LCD_XSIZE           720
#define LCD_YSIZE           1280

#define VBPD		27
#define VFPD		20
#define VSPW		4
#define HBPD		60
#define HFPD		70
#define HSPW		20

麻烦知道的朋友 指点下 方向。