RK3288 设置两个静态ip后 wifi不能使用

Chip Platform Rockchip
1

如题，在ifconfig -a 能看到wlan1，ifconfig中看不到wlan1， service network-manager restart 后wifi可以使用，但是两个静态ip，eth0和eth1都没有ip了，求解

2

你需要添加wifi和ethernet共用补丁

3

jpchen 发表于 2019-4-24 16:20
你需要添加wifi和ethernet共用补丁

哦？那能提供一下补丁吗

4

设置两个静态IP，wifi没有。
ifconfig：
eth0 Link encap:Ethernet HWaddr 26:91:2d:12:d8:21
inet addr:192.168.23.100 Bcast:192.168.23.255 Mask:255.255.255.0
inet6 addr: fe80::2491:2dff:fe12:d821/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1095 errors:0 dropped:0 overruns:0 frame:0
TX packets:25 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:113012 (113.0 KB) TX bytes:1238 (1.2 KB)
Interrupt:59

eth1 Link encap:Ethernet HWaddr 00:0e:c6:b6:ef:4a
inet addr:192.168.1.100 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

打印信息如下，

  • Stopping configure network device security [ OK ]
    Waiting for network configuration…
    Waiting up to 60 more seconds for network configuration…
    Booting system without full network configuration…
  • Stopping Failsafe Boot Delay [ OK ]
5

问题已解决，结束