U-Boot 2017.09(u-boot commit id: aa51a7d1b)(sdk version: .xml) (Mar 26 2025 - 15:48:56 +0800)

Model: Rockchip RK3588 Evaluation Board
PreSerial: 2, raw, 0xfeb50000
DRAM:  4 GiB
Sysmem: init
Relocation Offset: eda19000
Relocation fdt: eb9fa5f8 - eb9fecd0
CR: M/C/I
Using default environment

mmc@fe2c0000: 1, mmc@fe2e0000: 0
Bootdev(atags): mmc 0
MMC0: HS200, 200Mhz
PartType: EFI
DM: v2
boot mode: None
=================begin===================
164318 bytes read in 7 ms (22.4 MiB/s)
DTB(Distro): rk-kernel.dtb
I2c0 speed: 100000Hz
vsel-gpios- not found!
en-gpios- not found!
vdd_cpu_big0_s0 800000 uV
vsel-gpios- not found!
en-gpios- not found!
vdd_cpu_big1_s0 800000 uV
I2c1 speed: 100000Hz
vsel-gpios- not found!
en-gpios- not found!
vdd_npu_s0 800000 uV
spi2: RK806: 2
ON=0x00, OFF=0x00
vdd_gpu_s0 750000 uV
vdd_cpu_lit_s0 750000 uV
vdd_log_s0 750000 uV
vdd_vdenc_s0 init 750000 uV
vdd_ddr_s0 850000 uV
Firefly fixed_regulator_set_enable: dev='vcc-fan-pwr-en-regulator', enable=1, delay=0, has_gpio=1
get vp0 plane mask:0x5, primary id:2, cursor_plane:-1, from dts
get vp1 plane mask:0xa, primary id:3, cursor_plane:-1, from dts
get vp2 plane mask:0x140, primary id:8, cursor_plane:-1, from dts
get vp3 plane mask:0x280, primary id:9, cursor_plane:-1, from dts
rockchip_dw_hdmi_qp_probe: can't get link_clk
Warn: can't find connect driver
Warn: can't get connect driver
Could not find baseparameter partition
Model: ROC-RK3588S-PC V12(Linux)
No resource partition
No file: logo.bmp
=================begin===================
512 bytes read in 2 ms (250 KiB/s)
logo(Distro): logo.bmp
=================begin===================
127818 bytes read in 4 ms (30.5 MiB/s)
logo(Distro): logo.bmp
Rockchip UBOOT DRM driver version: v1.0.1
vp0 have layer nr:2[0 2 ], primary plane: 2
vp1 have layer nr:2[1 3 ], primary plane: 3
vp2 have layer nr:2[6 8 ], primary plane: 8
vp3 have layer nr:2[7 9 ], primary plane: 9
Using display timing dts
dsi@fde20000:  detailed mode clock 52000 kHz, flags[a]
    H: 1024 1174 1194 1344
    V: 0600 0615 0620 0635
bus_format: 100e
VOP update mode to: 1024x600p61, type: MIPI0 for VP2
[list]p_rate=1188000000, best_rate=51652173, div=23, sel=0
[list]p_rate=1500000000, best_rate=51724137, div=29, sel=1
[list]p_rate=0, best_rate=51724137, div=29, sel=1
[list]p_rate=786431991, best_rate=51724137, div=29, sel=1
[result]p_rate=786431991, best_rate=51724137, div=29, sel=1
VP2 set crtc_clock to 51724KHz
VOP VP2 enable Esmart2[500x501->500x501@262x49] fmt[2] addr[0xedf20000]
final DSI-Link bandwidth: 344826 Kbps x 4
Using display timing dts
dsi@fde30000:  detailed mode clock 52000 kHz, flags[a]
    H: 1024 1174 1194 1344
    V: 0600 0615 0620 0635
bus_format: 100e
VOP update mode to: 1024x600p61, type: MIPI1 for VP3
[list]p_rate=1188000000, best_rate=51652173, div=23, sel=0
[list]p_rate=1500000000, best_rate=51724137, div=29, sel=1
[list]p_rate=0, best_rate=51724137, div=29, sel=1
[list]p_rate=786431991, best_rate=51724137, div=29, sel=1
[result]p_rate=786431991, best_rate=51724137, div=29, sel=1
VP3 set crtc_clock to 51724KHz
VOP VP3 enable Esmart3[500x501->500x501@262x49] fmt[2] addr[0xedf20000]
final DSI-Link bandwidth: 344826 Kbps x 4
CLK: (uboot. arm: enter 1008000 KHz, init 1008000 KHz, kernel 0N/A)
  b0pll 24000 KHz
  b1pll 24000 KHz
  lpll 24000 KHz
  v0pll 24000 KHz
  aupll 786431 KHz
  cpll 1500000 KHz
  gpll 1188000 KHz
  npll 850000 KHz
  ppll 1100000 KHz
  aclk_center_root 702000 KHz
  pclk_center_root 100000 KHz
  hclk_center_root 396000 KHz
  aclk_center_low_root 500000 KHz
  aclk_top_root 594000 KHz
  pclk_top_root 100000 KHz
  aclk_low_top_root 396000 KHz
Net:   eth0: ethernet@fe1b0000, eth1: ethernet@fe1c0000
Hit key to stop autoboot('CTRL+C'):  0 
ANDROID: reboot reason: "(none)"
optee api revision: 2.0
TEEC: Waring: Could not find security partition
Not AVB images, AVB skip
No valid android hdr
Android image load failed
Android boot failed, error -1.
## Booting FIT Image FIT: No fit blob
FIT: No FIT image
Unknown command 'bootrkp' - try 'help'
MMC: no card present
mmc_init: -123, time 1
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:3...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
=================begin===================
75 bytes read in 3 ms (24.4 KiB/s)
FIREFLY: use /rk-kernel.dtb
1:      rk-kernel.dtb linux-5.10.0
Retrieving file: /Image-5.10.0
=================begin===================
35840512 bytes read in 261 ms (131 MiB/s)
Retrieving file: /rk-kernel.dtb
=================begin===================
164318 bytes read in 7 ms (22.4 MiB/s)
Fdt Ramdisk skip relocation
## Flattened Device Tree blob at 0x08300000
   Booting using the fdt blob at 0x08300000
  'reserved-memory' ramoops@110000: addr=110000 size=f0000
   Using Device Tree in place at 0000000008300000, end 000000000832b1dd
No resource partition
No file: logo_kernel.bmp
=================begin===================
512 bytes read in 3 ms (166 KiB/s)
logo(Distro): logo_kernel.bmp
=================begin===================
127818 bytes read in 4 ms (30.5 MiB/s)
logo(Distro): logo_kernel.bmp
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x09400000 - 0xf0000000 (size: 0xe6c00000)
Adding bank: 0x1f0000000 - 0x200000000 (size: 0x10000000)
Total: 1360.443 ms

Starting kernel ...

I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Secondary CPU 2 initializing
I/TC: Secondary CPU 2 switching to normal world boot
I/TC: Secondary CPU 3 initializing
I/TC: Secondary CPU 3 switching to normal world boot
I/TC: Secondary CPU 4 initializing
I/TC: Secondary CPU 4 switching to normal world boot
I/TC: Secondary CPU 5 initializing
I/TC: Secondary CPU 5 switching to normal world boot
I/TC: Secondary CPU 6 initializing
I/TC: Secondary CPU 6 switching to normal world boot
I/TC: Secondary CPU 7 initializing
I/TC: Secondary CPU 7 switching to normal world boot
[    0.988028] fiq_debugger fiq_debugger.0: IRQ fiq not found
[    0.988530] fiq_debugger fiq_debugger.0: IRQ wakeup not found
[    0.989043] fiq_debugger_probe: could not install nmi irq handler
[    0.994895] vcc_3v3_sd_s0: regulator get failed, ret=-517
[    1.369927] rk-pcie fe190000.pcie: IRQ msi not found
[    1.369941] rk-pcie fe190000.pcie: Missing *config* reg space
[    1.370007] rk-pcie fe190000.pcie: Missing *config* reg space
[    1.370072] rk-pcie fe190000.pcie: invalid resource
[    1.402978] dw-mipi-dsi2 fde20000.dsi: [drm:dw_mipi_dsi2_bind] *ERROR* Failed to find panel or bridge: -517
[    1.409077] mali fb000000.gpu: Power control initialization failed error = -517
[    1.429997] rk806 spi2.0: no sleep-setting state
[    1.430008] rk806 spi2.0: no reset-setting pinctrl state
[    1.430013] rk806 spi2.0: no dvs-setting pinctrl state
[    1.527292] rk_gmac-dwmac fe1b0000.ethernet: no regulator found
[    1.527312] rk_gmac-dwmac fe1b0000.ethernet: Can not read property: rx_delay.
[    1.527318] rk_gmac-dwmac fe1b0000.ethernet: set rx_delay to 0xffffffff
[    1.527336] rk_gmac-dwmac fe1b0000.ethernet: cannot get clock mac_clk_rx
[    1.527342] rk_gmac-dwmac fe1b0000.ethernet: cannot get clock mac_clk_tx
[    1.527356] rk_gmac-dwmac fe1b0000.ethernet: cannot get clock clk_mac_speed
[    1.662334] rockchip-pinctrl pinctrl: pin gpio3-13 already requested by feb60000.serial; cannot claim for fe1c0000.ethernet
[    1.662346] rockchip-pinctrl pinctrl: pin-109 (fe1c0000.ethernet) status -22
[    1.662353] rockchip-pinctrl pinctrl: could not request pin 109 (gpio3-13) from group gmac1-tx-bus2  on device rockchip-pinctrl
[    1.662358] rk_gmac-dwmac fe1c0000.ethernet: Error applying setting, reverse things back
[    1.849962] Failed to initialize dvfs info cpu4
[    1.900117] get_framebuffer_by_node: failed to get logo,offset
[    1.950201] rockchip-vop2 fdd90000.vop: [drm:vop2_wait_power_domain_off] *ERROR* wait pd7 off timeout power_ctrl: 0x7f
[    1.997132] rockchip-dmc dmc: failed to get vop bandwidth to dmc rate
[    1.997143] rockchip-dmc dmc: failed to get vop pn to msch rl
[    1.997234] rockchip-dmc dmc: could not find power_model node
[    2.500140] usb 2-1: device not accepting address 2, error -71
[    4.243448] rk-pcie fe190000.pcie: PCIe Link Fail
[    4.243462] rk-pcie fe190000.pcie: failed to initialize host
[    5.186042] RKNPU fdab0000.npu: RKNPU: failed to get vdd regulator for rknpu: -517
[    5.193572] Internal error: synchronous external abort: 96000010 [#1] SMP
[    5.194179] Modules linked in:
[    5.194465] CPU: 3 PID: 215 Comm: kworker/3:2 Not tainted 5.10.0 #2
[    5.195020] Hardware name: ROC-RK3588S-PC V12(Linux) (DT)
[    5.195507] Workqueue: events deferred_probe_work_func
[    5.195968] pstate: 20400009 (nzCv daif +PAN -UAO -TCO BTYPE=--)
[    5.196506] pc : rk_iommu_read+0x10/0x2c
[    5.196863] lr : rk_iommu_is_stall_active+0x60/0x68
[    5.197296] sp : ffffffc01360b9e0
[    5.197594] x29: ffffffc01360b9e0 x28: 0000000000000000 
[    5.198067] x27: ffffff81f1162650 x26: ffffffc0120df070 
[    5.198540] x25: 0000000000000000 x24: 0000000000000000 
[    5.199013] x23: ffffff81f0e86940 x22: ffffff81f4816658 
[    5.199485] x21: 0000000000000001 x20: ffffff81f0d08a80 
[    5.199958] x19: 0000000000000001 x18: 0000000000000000 
[    5.200430] x17: 00000000ac486ed1 x16: 00000000c0ee1c36 
[    5.200903] x15: 000000000000000a x14: 0000000000000000 
[    5.201376] x13: ffffffffffffffff x12: 0000000000000008 
[    5.201848] x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f 
[    5.202321] x9 : ffffffc0108fd580 x8 : 7f7f7f7f7f7f7f7f 
[    5.202793] x7 : 6f6d6a712c373734 x6 : 0000000000000890 
[    5.203265] x5 : 0000000000000000 x4 : 0000000000000080 
[    5.203738] x3 : 0000000000000000 x2 : ffffffc1ed572000 
[    5.204210] x1 : 0000000000000004 x0 : ffffffc012981004 
[    5.204683] Call trace:
[    5.204908]  rk_iommu_read+0x10/0x2c
[    5.205232]  rk_iommu_enable_stall+0x118/0x134
[    5.205634]  rk_iommu_enable+0x44/0x218
[    5.205980]  rk_iommu_resume+0x2c/0x40
[    5.206315]  pm_generic_runtime_resume+0x30/0x44
[    5.206729]  __rpm_callback+0x48/0x120
[    5.207063]  rpm_callback+0x7c/0x88
[    5.207375]  rpm_resume+0x454/0x4ec
[    5.207688]  __pm_runtime_resume+0x74/0x9c
[    5.208056]  pm_runtime_get_suppliers+0x74/0xbc
[    5.208458]  driver_probe_device+0x7c/0x14c
[    5.208837]  __device_attach_driver+0x10c/0x114
[    5.209239]  bus_for_each_drv+0xa0/0xc8
[    5.209585]  __device_attach+0xfc/0x18c
[    5.209931]  device_initial_probe+0x1c/0x28
[    5.210309]  bus_probe_device+0x38/0x9c
[    5.210655]  deferred_probe_work_func+0xdc/0xf0
[    5.211060]  process_one_work+0x210/0x330
[    5.211418]  process_scheduled_works+0x4c/0x50
[    5.211820]  worker_thread+0x234/0x310
[    5.212155]  kthread+0x124/0x134
[    5.212446]  ret_from_fork+0x10/0x30
[    5.212772] Code: aa1e03e9 d503201f d503233f 8b214000 (b9400000) 
[    5.213309] ---[ end trace 66dc72963d92acbf ]---
