Hello,
I just try to upgrade my AIO3399C board with a home made firmware that i compiled without modifying anything (for trying) using linux and Linux_Upgrade_Tool 27 provided with sources.
Now, i can not boot anymore, and the board is completely out of order
Here are the debug logs when I try to boot:
Welcome to minicom 2.7.1
OPTIONS: I18n
Compiled on Aug 13 2017, 15:25:34.
Port /dev/ttyUSB0, 12:15:52
Press CTRL-A Z for help on special keys
DDR Version 1.08 20170320
In
Channel 0: LPDDR4,50MHz
CS = 0
MR0=0x98
MR1=0x0
MR2=0x0
MR3=0x0
MR4=0x3
MR5=0xFF
MR6=0x2
MR7=0x0
MR8=0x8
MR9=0x0
MR10=0x0
MR11=0x0
MR12=0x4D
MR13=0x0
MR14=0x4D
MR15=0x0
MR16=0x0
MR17=0x0
MR18=0x0
MR19=0x0
MR20=0x0
MR21=0x0
MR22=0x0
MR23=0x0
MR24=0x8
MR25=0xFF
CS = 1
MR0=0x19
MR1=0x1A
MR2=0x1B
MR3=0x1C
MR4=0x1D
MR5=0x1E
MR6=0x1F
MR7=0x20
MR8=0x21
MR9=0x22
MR10=0x23
MR11=0x24
MR12=0x25
MR13=0x26
MR14=0x27
MR15=0x28
MR16=0x29
MR17=0x2A
MR18=0x2B
MR19=0x2C
MR20=0x2D
MR21=0x2E
MR22=0x2F
MR23=0x30
MR24=0x31
MR25=0x32
full training error!!!
Cap error!
Channel 1: LPDDR4,50MHz
CS = 0
MR0=0x98
MR1=0x0
MR2=0x0
MR3=0x0
MR4=0x1
MR5=0xFF
MR6=0x2
MR7=0x0
MR8=0x8
MR9=0x0
MR10=0x0
MR11=0x0
MR12=0x4D
MR13=0x0
MR14=0x4D
MR15=0x0
MR16=0x0
MR17=0x0
MR18=0x0
MR19=0x0
MR20=0x0
MR21=0x0
MR22=0x0
MR23=0x0
MR24=0x8
MR25=0xFF
CS = 1
MR0=0x19
MR1=0x1A
MR2=0x1B
MR3=0x1C
MR4=0x1D
MR5=0x1E
MR6=0x1F
MR7=0x20
MR8=0x21
MR9=0x22
MR10=0x23
MR11=0x24
MR12=0x25
MR13=0x26
MR14=0x27
MR15=0x28
MR16=0x29
MR17=0x2A
MR18=0x2B
MR19=0x2C
MR20=0x2D
MR21=0x2E
MR22=0x2F
MR23=0x30
MR24=0x31
MR25=0x32
full training error!!!
Cap error!
ERR
What can i do to make it work ?
Why flashing a board bricks it ?